Numarul modelului.: 7ways 16/12mm DB Tube Bundle
Marca: Oem
Diameter: 16/12 14/10 12/8 10/6mm
Length: customization
Ovality (%, Before Coiled): 5%
numele produsului: microduct
Material: HDPE
Serviciu De Procesare: Extrudare
Opțiuni De Culoare: Alb, roșu, verde, albastru complet colorat
Usage: underground installation
Grosimea Sub-conductei: 2,0mm
Grosimea Tecii: 1,2 mm sau personalizat
| Unități de vânzare: | Meter |
| Tip pachet: | Pachetul standard de export, lungimea tamburului este de 2000m sau personalizat |
| Exemplu imagine: |
|
The file is encrypted. Please fill in the following information to continue accessing it
|
Pos.
|
Mechanical performance
|
Test conditions
|
Performance
|
Standard
|
|
1
|
Tensile strength
at yield |
Rate of extension:
100mm/min |
≥1600N
|
IEC 60794-1-2
Method E1 |
|
2
|
Crush
|
Sample length: 250mm
Load: 1200N Duration of Max. load: 1 minutes Recovery time: 1 hour |
The outer and inner diameter shall show, under visual examination without damage and no reduction of diameter greater than 15%.
|
IEC 60794-1-2
Method E3 |
|
3
|
Kink
|
≤160mm
|
-
|
IEC 60794-1-2
Method E10 |
|
4
|
Impact
|
Striking surface radius: 10mm
Impact Energy: 1J Number of impact: 3 times Recovery time: 1 hour |
Under visual examination, there shall be no damage to the micro duct.
|
IEC 60794-1-2
Method E4 |
|
5
|
Bend radius
|
Number of turns: 5
Mandrel diameter: 192mm Mumber of cycles: 3 |
The outer and inner diameter shall show, under visual examination without damage and no reduction of diameter greater than 15%.
|
IEC 60794-1-2
Method E11 |
|
6
|
Friction
|
/
|
≤0.1
|
FCST
|
|
Pos.
|
Item
|
Specification
|
|
|
1
|
Appearance
|
Smooth outer wall (UV-stabilized) without visible impurities; well-proportioned color, no bubbles or cracks; with defined markings
on outer wall. |
|
|
2
|
Tensile strength
|
Use Pull socks to tension a sample in accordance with table below:
Sample length: 1m Tensile speed: 20mm/min Load: 7500N Duration of the tension: 5 min. |
No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.
|
|
3
|
Crush Resistance
|
A 250mm sample after 1 minute load time and 1 hour recovery time. Load (plate) shall be 2000N. The imprint of the plate on the
sheath is not considered as mechanical damage. |
No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.
|
|
Pos.
|
Item
|
Specification
|
|
|
4
|
Impact
|
Striking surface radius shall be 10mm and impact energy 10J. Recovery time shall be one out. The imprint of the striking surface
on the microduct is not considered as mechanical damage. |
No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.
|
|
5
|
Bend
|
Diameter of mandrel shall be 40X OD of sample, 4 turns, 3 cycles.
|
No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.
|
ambalare: Pachetul standard de export, lungimea tamburului este de 2000m sau personalizat
Productivitate: 600000 Meter/Meters per Month
Transport: Ocean,Land,Air,Express
Locul de origine: China
Abilitatea de alimentare: 600000 Meter/Meters per Month
Certificat: ISO,ROHS
Codul SA: 3917210000
Port: Shenzhen,Guangzhou
Tipul de plată: L/C,T/T,Paypal,others,Cash
Incoterm: FOB,CFR,CIF,EXW,FAS,FCA,Express Delivery
S-ar putea sa-ti placa si
Declarație de confidențialitate: Confidențialitatea dvs. este foarte importantă pentru noi. Compania noastră promite să nu vă dezvăluie informațiile personale pentru nicio expansiune cu permisiunile dvs. explicite.
Completați mai multe informații, astfel încât să poată lua legătura cu tine mai repede
Declarație de confidențialitate: Confidențialitatea dvs. este foarte importantă pentru noi. Compania noastră promite să nu vă dezvăluie informațiile personale pentru nicio expansiune cu permisiunile dvs. explicite.
Contact Now